Its first customer was PCs Limited, later known as Dell Computer. The company started as a manufacturer of complete motherboards, positioning itself in the high-end segment. It is headquartered in Building 800 at 3095 Satellite Boulevard in unincorporated Gwinnett County, Georgia, United States, near the city of Duluth, and in the Atlanta metropolitan area. The company was founded in 1985 by Pat Sarma and Subramonian Shankar. With time and patience, you will learn how to find the sweet spot for clock speeds and stability.AMI ( American Megatrends International LLC, formerly American Megatrends Inc.) is an international hardware and software company, specializing in PC hardware and firmware. Lower the settings once the computer starts freezing while in Windows or if other anomalies occur. Return to the BIOS and incrementally change the “CPU Frequency” and “DRAM Frequency” settings. The new CPU speed will be listed next to “Processor.” Type “Msinfo32” in the “Run” box and press the “Enter” key. Press the “Windows' and “R” keys simultaneously. Press the “Y” or “Enter” key to confirm your changes and to exit the BIOS.īoot into Windows. This will display a confirmation dialog box. Look at the bottom of the screen for a message similar to “Save Settings and Exit” and press the corresponding key. Since you have only increased the “CPU Frequency” by 10 MHz, you can leave this setting alone. Once you increase the “CPU Frequency” beyond a point the RAM can handle, you will need to lower the “DRAM Frequency” to accommodate the change. The higher the “CPU Frequency,” the lower the “DRAM Frequency” setting will need to be or vice-versa. This page will display settings related to your RAM and PCI bus.Īrrow to “DRAM frequency.” This setting and the “CPU Frequency” are directly related. Highlight “Chipset Configuration” and press the “Enter” key. This will take you back to the “Advanced” tab.

Highlight “CPU Frequency” and press your arrow or “Page Down” keys to move the number up by “10” This will increase the overall CPU bus by 10 MHz. Highlight “Overclock Mode” and use the arrow or “Page Down” keys to change the option to “Manual” or “CPU.” Use your arrow keys to select “CPU Configuration” while on the “Advanced” tab and press the “Enter” key. Press the “Y” or “Enter” key to confirm your changes and to exit the BIOS. Highlight “Auto” or “Automatic” and press the “Enter” key. Highlight “AI Overclock” or “Automatic Overclocking” and press the “Enter” key. This loads a Configure System Frequency/Voltage screen. Use the “Arrow” key to select the “Advanced” tab at the top of the BIOS Setup screen.Īrrow to “JumperFree Configuration” or “AI Overclocking” by using your arrow and “Enter” keys.

American megatrends bios update p11 b0